Warehouse Design in Zayed City Industrial Area

Governing authority for warehouse permits is Abu Dhabi's Department of Municipalities and Transport (DMT) via the Tasheel digital permit platform, with ADDED licensing clearance required for tenants occupying industrial units. The permit process mirrors standard Abu Dhabi industrial zone workflow: structural drawings, MEP coordination package, civil defence fire system drawings, and accessibility compliance documentation submitted together for simultaneous review. Plot setback rules in Zayed City Industrial require a minimum 6-metre front setback and 3-metre side setbacks, affecting usable warehouse footprint on plots under 2,000 square metres.

ADDC (شركة أبوظبي لتوزيع الكهرباء والمياه) supplies electricity and potable water throughout the zone, with LV supply at 400V three-phase for standard warehouse loads and 11kV HV supply available on request for larger facilities. Water connection for fire suppression systems requires a separate application for dedicated fire service inlet sizing, typically coordinated with the civil defence drawing submission. Subsoil conditions in Zayed City Industrial consist of medium-dense sandy gravel with occasional sabkha (salt flat) intrusions in lower-lying areas — a geotechnical risk that site investigation must characterise before strip or pad foundation design is finalised. Warehouse portal frames in the 20–25 metre clear span range are standard for the zone's general logistics occupiers, with 6–9 metre eaves heights accommodating standard pallet racking and mezzanine installations.

Building information modelling (BIM) submission at LOD 300 is increasingly required by Abu Dhabi DMT for warehouse permits above 10,000 square metres GFA in Zayed City Industrial, following the adoption of Abu Dhabi's digital delivery framework for large commercial buildings. Waste management plans must be prepared and submitted with permit applications for industrial buildings, detailing segregated recycling streams for construction debris, ongoing operational waste, and hazardous material disposal in compliance with Abu Dhabi Environment Agency regulations. Accessibility compliance per UAE Federal Law No. 29 of 2006 requires ramp provisions at all pedestrian entries, accessible toilet facilities within office mezzanines, and tactile guidance strips in reception areas regardless of industrial classification. Rainwater downpipe connections to site drainage networks must comply with Abu Dhabi municipality's urban drainage standards, with detention tank sizing required for plots above 2,000 square metres to attenuate peak runoff rates. Concrete kerb and channel systems along loading apron edges protect slab edges from vehicle impact damage during daily truck manoeuvring, a detail that reduces long-term maintenance liability in the active logistics environments typical of Zayed City Industrial plots.